Filter
Top Products
RECORDING
OPERATION
PREPARATION
INTRODUCTION
PLAYBACK
OPERATION
NOTICE
VIDEO IN VIDEO OUT
12345
CAMERA
ALARM IN
REMOTE
678
12345678
ALARM
OUT
MONITOR
VCR
REC
VCR
PLAY
Monitor TV.
AC120V
To AC outlet
To ALARM IN
To VCR playback
Frame Sequential Switcher
To VCR REC
To ALARM
OUTPUT
To VIDEO OUT
To GND
To REC TRIGGER INPUT
To REC TRIGG. OUT
To
VIDEO IN
ALL CLEAR
REMOTE IN
MIC IN
IN
GND
RESET
OUT
GND
OUT
GND
TAPE END
ALARM
REC
TRIGG.
IN
OUT
VIDEO
IN
OUT
AUDIO
SEE MANUAL
SEE MANUAL
IN
ONE
SHOT
Typical Connection with the Sequential Switcher
When connected with a sequential switcher, set the alarm recording mode to MANUAL by menu screen.
For further details, consult the instruction manuals of the connected devices.
12
When using the VCR connected to a frame sequential switcher, pay
attention to the following matters.
When playing back in the A12, A18 or A24-hour mode, mixing of
pictures from other channels may occur. If this occurs, play back in a
mode other than the A12, A18 or A24-hour mode.
If the following phenomena occur during playback in a time mode of
24 hours or longer, adjust by using the TRACKING button.
1. Mixing of signals from another channel.
Go to slow playback and press the TRACKING button to adjust
until the picture appears from the channel you want to view.
2. Picture waves up and down.
Press the TRACKING button during still picture playback and
adjust the picture until the picture stops waving up and down.