Filter
Top Products
RECORDING
OPERATION
PREPARATION
INTRODUCTION
PLAYBACK
OPERATION
NOTICE
ON-SCREEN FUNCTIONS
When the power is turned ON, the time and date modes are displayed on the monitor screen (live picture). On-screen displays are
not available in the event of no video input signal.
Date-Time Display
VCR display
Monitor screen
1 Date : Displayed with the month-day-year.
2 Day of the week :Automatically set to the correct day of the week when the date is set.
3 Time : Set to 24-hour cycle at factory.
It is possible to modify to 12-hour (AM/PM) cycle display.
4 Playback/Recording Time : Playback or Recording time display
On-Screen Position
Press the LOCATION SELECT button to adjust the display to desirable position.
The display moves in the direction shown by the arrows.
However, during the date-time display screen, pay attention to the following when
setting the date and time display positions:
When the display is set to an end of the monitor screen as shown in the figure,
synchronization instability or color flickering may occur in some monitor TVs.
Press this button : To down
Press this button : To right
16
LOCATION SELECT
17:30:02 A 2
8/28/96 WED
17:30:02 A 2
8/28/96 WED
17:30:02 A 2
8/28/96 WED
17:30:02 A 2
8/28/96 WED
17:30:02 A 2
8/28/96 WED
17:30:02 A 2
8/28/96 WED
17:30:02 A 2
Playback/Recording time
Time3
Date1 Day of the week2
4