Filter
Top Products
156
HDD format
HDD
Initializes the HDD.
Normally it is not required to initialize the HDD. However
when the HDD does not function correctly, initializing the
HDD may solve the situation. If you initialize the HDD, all
titles and library information stored in the HDD are
permanently deleted.
1) Press / buttons to select “Start”, then
press ENTER button.
2) Confirm the message, press
/ buttons to
select “Start”, and then press ENTER
button.
Initialization of the HDD starts.
If you want to cancel the initializing, select
“Cancel”.
DVD-RAM physical format
DVD-RAM
See page 35.
DVD Drive speed setting
DVD-RDVD-RW
HDD
DVD-RAM
To reduce the mechanical noise during High speed
dubbing (
page 100 – 105).
High speed:
Usual mode.
Low speed:
The dubbing speed is lowered to reduce the
mechanical noise.
0
HDD Format
Start Cancel
Entire disc contents including
library will be erased
if disc is formatted. Proceed?
Format
%
e.g.
HDD auto stop
HDD
Off:
Turns off the HDD auto stop mode.
On:
Turns the HDD drive off after recorder is idle for
approximately 5 minutes.
When PLAY or REC button is pressed for the HDD
while the HDD drive is turned off, it takes a little longer
time to play or record.
All HDD titles delete
HDD
This deletes all the titles on the HDD. Only the recorded
contents are deleted, so a DVD-RAM disc Library
information and reservation history are left as is and can
continue to be used.
1) Press / buttons to select “Yes”, then
press ENTER button.
2) Confirm the message, press
/ buttons to
select “Yes” and then press ENTER button.
Deletion of all titles starts.
If you want to cancel the deleting, select “No”.
Note
• If you periodically execute All HDD titles delete, this holds
down fragmentation (increased complexity) of the disc and
maintains good operability.
Yes No
All titles are about to be deleted in
spite of title protected. Proceed?
Customizing the function settings (Continued)
Function setup
RD-XS35SU/SC_Ope_E_p141-158 06.1.17, 7:25 PM156