Toshiba RD-XS35SU DVR User Manual


 
71
Recording
Playback
Introduction
Editing
Library
Function setup
Others
Locating a specific point by entering its elapsed time (Time Search)
1) Press T.SEARCH.
You may have to press repeatedly, depending on a disc. Press the button until
the following display appears.
e.g.
2) Press the number buttons and
/ to enter the desired time location on
the disc.
e.g. To enter 1 hour, 25 minutes, and 30 seconds
3) Press ENTER.
Notes
Some discs may not respond to this process.
Some scenes may not be accessed precisely as you specified.
This method for accessing specific locations is available only within the current title of
the HDD or a DVD-RAM/R/RW/DVD video disc or within a current track of a VIDEO
CD/audio CD.
Pressing CLEAR button resets the numbers.
001
00 00 00
::
Title
Search
Time
Locating by entering the number of a desired section
Normally titles, chapters, and tracks are numbered. By entering these
numbers, you can access a desired section.
1) Press T.SEARCH.
e.g.
2) Press
/ to select a section (title or chapter) you want to locate.
e.g.
3) Press the number buttons to enter a number of the section.
e.g. To enter 25, press 2, then press 5.
4) Press ENTER.
Notes
Pressing CLEAR button resets the numbers. To clear the display, press T.SEARCH
button several times (depending on a disc).
This method of locating a title is available only on a disc that contains title numbers.
If a title is erased, the numbers of the following titles decrease respectively.
When you record a new title (Original) on the HDD or a DVD-RAM disc, it is added
prior to current titles (Playlist), and each following title (Playlist) reference number will
advance by a factor of 1.
Title
Search
0001Chapter
001
0001
001
Title
Search
Chapter
If you are using a VIDEO
CD/audio CD, skip step 2.
When you want to
locate a chapter.
01 25 30
hour minute second
DVD-VIDEO
VCD CD
DVD-RDVD-RW
HDD
DVD-RAM
DVD-VIDEO
VCD CD
DVD-RDVD-RW
HDD
DVD-RAM
RD-XS35SU/SC_Ope_E_p066-071 06.1.17, 7:24 PM71