Filter
Top Products
14
Connections
COAXIAL
Connecting to a TV
Notes:
• Refer to the owner’s manual of the connected TV as well.
• When you connect the DVD video player to your TV, be sure to turn off the power and unplug both units from the
wall outlet before making any connections.
• If your television set has one audio input, connect the left and right audio outputs of the DVD video player to a Y
cable adapter (not supplied) and then connect to your TV.
• Connect the DVD video player directly to your TV. If you connect the DVD video player to a VCR, TV/VCR combination
or video selector, the playback picture may be distorted as DVD video discs are copy protected.
• Analog audio out will not have sound if DTS playback is selected.
Connect the DVD video player to your TV.
For details of output sound, see
Connecting to a TV
Signal flow
To wall
outlet
(yellow) (red) (white)
To S
VIDEO
OUT
To VIDEO
OUT
To ANALOG AUDIO OUT
Audio/video cable (supplied)
(yellow) (red) (white)
To video input
To audio inputs
TV or monitor with
audio/video inputs
To S video input
If the TV has an S video input, connect the
DVD video player with an S video cable.
When using an S video cable, do not
connect the yellow video cable and
component video cables (Y/P
B/PR).
S video cable (not supplied)
• Make the following setting.
On-screen display Select Page
“Digital Out”
“Raw”
or “PCM”
38
31
43
“Video Output”
“CVBS” or
* “YUV”
38
42
* Only for analog video out jack (yellow)
connection with progrssive scan off.