Toshiba SD-V296KU DVD VCR Combo User Manual


 
10
EN
Note:
• Connect this unit directly to your TV. If RCA audio/video cables are connected
to a VCR, pictures may be distorted due to the copy protection system.
• DIGITAL AUDIO OUT (COAXIAL), DVD AUDIO OUT, S-VIDEO OUT and
COMPONENT VIDEO OUT jacks are only useful in DVD mode.
Connection to a TV
After connecting to your TV:
Press the input selector button (usually TV/VIDEO, INPUT or AUX)
on your TV to switch an appropriate external input channel (usually
near channel 0) for viewing the picture from this unit. If the picture
does not appear, also refer to the manual accompanying your TV.
If your TV is compatible with 525 (480) progressive
scanning, and you want to enjoy that high quality picture
for DVD playing;
You must select the connection COMPONENT VIDEO OUT
above and progressive scanning mode. To set the mode, set
“PROGRESSIVE” to “ON” in “DISPLAY” menu, so that the “P. SCAN”
on the front panel display appears. Refer to pages 23-24 for
more details.
If your TV is not compatible with progressive scanning;
Use this unit in interlace mode and set “PROGRESSIVE” to “OFF”
either in “DISPLAY” menu or by pressing and holding
[ B (PLAY)] on the front of the unit on the DVD side for more
than 5 seconds, so that the “P. SCAN” on the front panel display
disappears.
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
VCR and Basic DVD Connection Available for DVD only
DVD’s picture quality
analog audio standard picture good picture better picture
AUDIO OUT VIDEO OUT S-VIDEO OUT
COMPONENT
VIDEO OUT
TV
This unit
oror
and
AUDIO IN
VIDEO IN
L
R
DIGITAL
AUDIO OUT
COAXIAL
AUDIO
OUT
DVD VCR
DVD/VCR
S-VIDEO
OUT
COMPONENT
VIDEO OUT
VIDEO IN
AUDIO OUT
VIDEO OUT
L
LY
C
B
/
P
B
C
R
/
P
R
R
AUDIO IN
L
R
R
VC
R
V
IDE
O
I
N
AUDIO IN
L
R
DIGITAL
A
U
DI
O
OU
T
COAXIAL
VCRDVD/VCR
AUDIO OUT
L
R
AUDIO IN
L
R
AUDIO
OUT
DVD
L
R
VCRDVD/VCR
VIDEO OUT
VIDEO IN
S-VIDEO IN
DIGITAL
AUDIO OUT
COAXIAL
AUDIO
OUT
DVD
S-VIDEO
OUT
COMPONENT
VIDEO OUT
DIGITAL
AUDIO OUT
COAXIAL
AUDIO
OUT
DVD
S-VIDEO
OUT
COMPONENT
VIDEO OUT
Y
C
B
/
P
B
C
R
/
P
R
COMPONENT
VIDEO IN
COMPONENT
VIDEO IN
C
B
C
R
P
B
P
R
or
YY
RCA video cableRCA audio cable S-video cable component video cable
or
If your TV does not have AUDIO/VIDEO input jack, see the section “Connecting to RF Modulator (Not Supplied)” on this page.
Connections
If your TV has AUDIO/VIDEO input jacks, see the section “Connection to a TV” on this page. If not, it is still possible to connect this
unit to your TV by using a STEREO AUDIO/VIDEO RF modulator (commercially available). In this case, follow the instructions below.
DIGITAL
AUDIO OUT
COAXIAL
AUDIO
OUT
DVD VCR
DVD/VCR
S-VIDEO
OUT
COMPONENT
VIDEO OUT
AUDIO IN
VIDEO IN
AUDIO OUT
VIDEO OUT
L
LY
R
L
R
R
C
B
/
P
B
C
R
/
P
R
STEREO AUDIO / VIDEO RF Modulator
(commercially available)
TO TVCHANNEL VIDEO AUDIO
RL34
ANT IN
AC 120V
(Back of TV)
RCA Audio/Video
Cables
(Supplied)
(Back of this unit)
RF Cable
(commercially available)
Antenna
Cable
Signal
3
2
1
Antenna in jack
Connection to RF Modulator (Not Supplied)
Note:
• The quality of picture may become
poor if the unit is connected to an RF
modulator.
1) Disconnect the power cords of the devices from the AC outlet.
2)
Connect the AUDIO/VIDEO output jacks of this unit to the AUDIO /
VIDEO input jacks of your RF modulator by RCA Audio/Video cables.
3) The antenna input jack of your TV may have been already
occupied. If so, disconnect the RF cable from your TV and then
connect the RF cable to your RF modulator (usually marked
“ANT IN”).
4) Connect your RF modulator to your TV by another RF cable.
5) Set your RF modulator’s channel 3/4 switch to either 3 or 4,
whichever the TV channel is least used in your area. If your RF
modulator has a modulator/antenna switch, set it according to
your RF modulator’s manual.
6) Plug in the power cords of the devices to the AC outlet.
7) Turn on your TV and choose the same channel as you set the
RF modulator’s channel 3/4 switch to. For more details,
follow the instructions supplied with the RF modulator.
If your TV does not have AUDIO / VIDEO input jack.
E8EB5UD_SD-V296KU_EN_ES_v1.indd 10E8EB5UD_SD-V296KU_EN_ES_v1.indd 10 2008/07/15 16:14:582008/07/15 16:14:58