Filter
Top Products
–
24
–
EN
4 Select the desired item.
AUDIO
DRC
ON
DOWN SAMPLING
ON
DOLBY DIGITAL
BITSTREAM
DTS
OFF
ENTER
4 Select the desired item.
DISPLAY
TV ASPECT 4:3 LETTER BOX
STILL MODE AUTO
PROGRESSIVE OFF
ENTER
DISPLAY Setting
You can change the display functions. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 23.
B
AUDIO Setting
Choose the appropriate audio setting for your device. It only affects during the playback of DVD discs. Follow steps 1 to 3 in the
“CUSTOM Menu” section on page 23.
C
5
Note:
TV ASPECT:
• Select “4:3 LETTER BOX”, so
that black bars may appear
on the top and bottom of the
TV screen.
• Select “4:3 PAN & SCAN” for a
full height picture with both
sides adjusted.
• Select “16:9 WIDE” if a wide-
screen TV is connected to
this unit.
STILL MODE:
• Select “AUTO” usually.
• If you select “AUTO”, it
automatically selects the
best resolution setting
(“FRAME” or “FIELD”) based
on the data characteristics of
the pictures. (default)
• If you select “FIELD”, the
picture in the still mode will
be stabilized.
• If you select “FRAME”, the
picture in the still mode will
be highly defined.
• An individual picture on
the TV screen is called a
“frame”, which consists of
two separate images called
as “field”.
• Some pictures may be
blurred if you select “AUTO”
in the still mode due to their
data characteristics.
DISPLAY menu
AUDIO menu
TV ASPECT:
QUICK
(Default: 4:3 LETTER BOX)
See note on the right.
TV ASPECT
4:3
LETTER BOX
4:3
PAN & SCAN
16:9
WIDE
TV ASPECT
4:3 LETTER BOX
STILL MODE
AUTO
PROGRESSIVE OFF
STILL MODE:
(Default: AUTO)
See note on the right.
TV ASPECT
4:3 LETTER BOX
STILL MODE
AUTO
PROGRESSIVE OFF
STILL MODE
AUTO
FIELD
FRAME
5
DRC (Dynamic Range Control): (Default: ON)
Set to “ON” to compress the range between soft and loud sounds.
DOLBY DIGITAL:
QUICK
(Default: BITSTREAM)
Set to “BITSTREAM” when the unit is connected to a Dolby Digital decoder.
• BITSTREAM: outputs Dolby Digital signals.
• PCM: converts the Dolby Digital into PCM (2 channel).
DRC ON
DOWN SAMPLING
ON
DOLBY DIGITAL BITSTREAM
DTS OFF
OFF
ON
BITSTREAM
OFF
DOWN SAMPLING: (Default: ON)
Set to “ON” when outputting in 48kHz.
Set to “OFF” when outputting the original sound.
DRC ON
DOWN SAMPLING
ON
DOLBY DIGITAL
BITSTREAM
DTS OFF
ON
ON
PCM
OFF
DRC ON
DOWN SAMPLING
ON
DOLBY DIGITAL
BITSTREAM
DTS OFF
ON
OFF
BITSTREAM
OFF
Note:
DRC:
• This function is available
only on the discs which are
recorded in the Dolby Digital
format.
DOWN SAMPLING:
• When playing disc with
copyright protection, the
sound will be down sampled
at 48kHz, even if you set to
“OFF”.
•
This function is available only
on digital outputting of a disc
recorded in 96kHz.
or
or
6 To exit the menu
Select the
desired
setting.
or
Select the
desired
setting.
or
Note:
PROGRESSIVE:
• You can set “PROGRESSIVE” to
“OFF” in “DISPLAY” menu or press
and hold [ B (PLAY)] on this unit
on the DVD side for more than
5 seconds during playback until
“P. SCAN” disappears on the DVD
player’s display.
• When “PROGRESSIVE“ is “ON”,
“P. SCAN” appears on the DVD
player’s display after you exit the
setup screen.
TV ASPECT
4:3 LETTER BOX
STILL MODE
AUTO
PROGRESSIVE
OFF
4:3 LETTER BOX
AUTO
ON
SETUP
Select “YES”.
Before proceeding…
1. Make sure your TV has progressive scan.
2. Connect with component video cable
NOTE: If there is no picture or picture is
distorted after selecting ‘YES’,
wait about 15 seconds for auto recovery.
Activate Progressive?
SELECT: K / L SET: ENTER
NO
YES
NO
YES
NO
YES
Confirm again to use progressive scan.
If Picture is good, select ‘YES’.
SELECT: K / L
SET: ENTER
Select “YES”.
If there is no picture
or you do not press
any buttons for 15
seconds, “PROGRES-
SIVE” will switch to
“OFF” and it will exit
“SETUP” menu.
or
or
PROGRESSIVE:
QUICK
(Default: OFF)
See note on the left.
6 To exit “TV ASPECT” or “STILL
MODE” menu
To complete
“PROGRESSIVE” setting
Note:
• In “QUICK” menu, “PLAYER
MENU”, “TV ASPECT”,
“PROGRESSIVE” or “DOLBY
DIGITAL” are available. “QUICK”
menu consists of the setting
menu frequently used, and they
are accompanied with
QUICK
.
You can make all settings in
“CUSTOM” menu.
SETUP
SETUP
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
Note:
• In “QUICK” menu, “PLAYER
MENU”, “TV ASPECT”,
“PROGRESSIVE” or “DOLBY
DIGITAL” are available. “QUICK”
menu consists of the setting
menu frequently used, and they
are accompanied with
QUICK
.
You can make all settings in
“CUSTOM” menu.
DRC ON
DOWN SAMPLING
ON
DOLBY DIGITAL
BITSTREAM
DTS OFF
ON
ON
PCM
BITSTREAM
DTS:
QUICK
(Default: OFF)
Set to “BITSTREAM” when the unit is connected to a DTS decoder.
ENTER
E8EB5UD_SD-V296KU_EN_ES_v1.indd 24E8EB5UD_SD-V296KU_EN_ES_v1.indd 24 2008/07/14 10:38:272008/07/14 10:38:27