Filter
Top Products
35
Reference
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
Setting the off-timer
You can set the TV so it turns off automatically.
To set the off-timer:
1. Press TIMER once to select the OFF TIMER.
2. Press two Number buttons (0-9) to enter how long you want the
TV to remain on (up to three hours, in 10 minute increments).
Enter the numbers after the number position starts to blink.
TO SET OFF TIME
120
OFF T IMER
PUSH 0-9
PUSH TIMER
TO START
3. Press TIMER to start the timer. The display color will change
from purple to blue, then turn off.
To cancel the off-timer:
Press POWER twice, once to turn the TV off, and once to turn it
on again.
Setting the clock
To set the clock
1. Press TIMER twice to select the CLOCK.
2. Press four Number buttons (0-9) to enter the correct time.
Enter the numbers after the number position starts to blink.
The clock operates on a 12 hour-cycle.
TO SET HOUR AND MINUTE
09:25
CLOCK
PUSH 0-9
PUSH TIMER
TO START
3. Press TIMER to start the clock. The display color will change
from purple to blue, then turn off.
To monitor the time:
Press RECALL.
CH RTN
ADV
ADV
MUTE RECALL
TV/VIDEO SURROUND
REC
TV/VCR
REW
FF
STILL
LOCATE
SWAP
STOP SOURCE
PLAY PIP
+
FAV
C
.
C
A
P
T
R
E
S
E
T
X
D
S
E
X
I
T
-
FAV
VOL
CH
ENTER
1
4
7
2
5
8
3
6
9
0
100
TV
VCR
MENU/
TIMER
POWER
ENT
CABLE
MTS
Note :
The timer can also be set through the
SET UP menu.
If you want to see how much time remains
before the shut-off time, press TIMER once.
The remaining time will be displayed. To erase
the display, press TIMER again.
Note:
The clock can also be set through SET UP
menu.
If the power source for the TV is interrupted
(i.e., AC cord unplugged or power failure),
the clock will have to be reset. (The time
display will show “00:00.”)
RECALL
POWER
TIMER
Number