Filter
Top Products
14
(E)27HL85 size213*276
Connecting
your TV
Note:
If you have VCRs with S-video, use S-video
cables instead of standard video cables for
better picture performance.
Do not connect the same VCR to the output
and input jacks on the TV at the same time.
To dub or edit, VCR 2 must select LINE IN,
and the TV must select VIDEO 1.
Note:
If you have a camcorder with S-video, you
can use an S-video cable instead of a
standard video cable for better picture
performance. Plug the S-video and standard
audio cables into the “VIDEO-1 IN” inputs on
the upper back panel of the TV instead of the
inputs on the side panel.
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
Connecting two VCRs
This connection allows you to record (dub/edit) from VCR1 to
VCR2 while watching a videotape. You also can record from one TV
channel with VCR1 while watching another TV channel.
You will need:
• two coaxial cables
• two sets of standard A/V cables
IN from ANT OUT to TV
VIDEO AUDIO
LR
IN
OUT
IN from ANT OUT to TV
CH 3
CH 4
VIDEO AUDIO
CH 3
LR
CH 4
IN
OUT
Connecting a camcorder
This connection allows you to watch video materials recorded on a
camcorder.
You will need:
• one set of standard A/V cables
VCR1 (plays)
From
Antenna
TV upper
back panel
VCR2 (records)
Camcorder
TV side panel
(VIDEO-2 IN)
TV lower back panel
VIDEO S-VIDEO
AUDIO
OUT
L
R
#01E09-15_27HL85 05.5.12, 3:14 PM14
Black