Filter
Top Products
20
Using the volume lock feature (8000)
For the TV, CABLE/SAT, VCR, and DVD modes, the volume controls
(VOL 5∞ and MUTE) can be programmed (locked) to the selected
device mode. This feature does not apply to the AUDIO1/2 modes.
For example, to lock the volume controls to always jump to the CABLE/
SAT mode:
1. Repeatedly press MODE to select the CABLE/SAT mode.
2. While holding down the RECALL button, press 8 –0 –0 –0.
3. Press VOL 5.
The Mode indicator will blink two times (locked).
The following table describes in more detail the Volume Lock
implementation.
NUMBERS
MODE
VOL 5∞
RECALL
Volume
Locked to
AUD1DVDVCRCBL/SATTV AUD2
TV (default)
CBL/SAT
VCR
DVD
AUD1
AUD2
TV
CBL/SAT
VCR
DVD
AUD1
AUD2
TV
CBL/SAT
VCR
DVD
AUD1
AUD2
TV
CBL/SAT
VCR
DVD
AUD1
AUD2
TV
CBL/SAT
VCR
DVD
AUD1
AUD2
AUD1
AUD1
AUD1
AUD1
AUD1
AUD2
AUD2
AUD2
AUD2
AUD2
AUD1
AUD2
To reset the volume controls to the original device code:
1. While holding down the RECALL button, press 8 –0 –0 –0.
2. Press VOL ∞.
The Mode indicator will blink four times (unlocked).
Operational feature reset (8900)
This feature clears all setup features not related to “Device code set
up” and resets the Volume Lock to “TV.”
To reset the features:
While holding down the RECALL button, press 8 –9 –0 –0.
The Mode indicator will blink two times, and then pause and blink
two more times.
Using the
Remote Control
J3U00321B(E)_P16-26 9/08/2005, 10:34 AM20