Filter
Top Products
32
Using the TV’s
Features
Selecting the video input source
Press INPUT to view a signal from another device connected to your
TV, such as a VCR or DVD player. You can select ANT, VIDEO 1,
VIDEO 2, VIDEO 3, ColorStream HD1, ColorStream HD2, or HDMI
depending on which input jacks you used to connect your devices
(see “Connecting your TV” on page 7).
Labeling the video input sources
The video label feature allows you to label each input source for your
TV from the following preset list of labels:
– : Uses the default label name
VCR : Video cassette recorder
DVD : DVD video
DTV : Digital TV set-top box
SAT : Satellite box
CBL : Cable box
To label the video input sources:
1. Press MENU, and then press
or
to display the OPTION menu.
2. Press ▲ or ▼ to highlight VIDEO
LABEL.
3. Press
to display the VIDEO
LABEL menu.
4. Press ▲ or ▼ to highlight the video
source you want to label.
5. Press or to select the desired
label for that input source.
6. Press EXIT to return to normal
viewing.
Pressing INPUT on the remote
control displays the current signal
source (press INPUT again or 0-6
to change)
OPTION
ON/OFF TIMER
FAVORITE CH
CH LABEL
VIDEO LABEL
OFF / OFF / SET
:SELECT :ADJUST
OPTION
1.VIDEO1
2.VIDEO2
3.VIDEO3
4.ColorStream HD1
5.ColorStream HD2
6.HDMI
-
/ VCR / DVD / DTV
-
SAT / CBL
-
-
-
-
:SELECT :ADJUST
Note:
When ColorStream HD 1, ColorStream HD 2,
or HDMI is selected, the video OUT jack does
not output a signal. To receive a video OUT
signal, you must use a standard video or
S-video connection instead.
SELECT: [0
-
6]
SOURCE SELECTION
0. ANT
1. VIDEO1
2. VIDEO2
3. VIDEO3
4. ColorStream HD1
5. ColorStream HD2
6. HDMI
NEVER CONNECT THIS TV TO A
PERSONAL COMPUTER (PC).
This TV is not intended for use
with a PC.
MENU
EXIT
INPUT
J3U00321B(E)_P27-33 9/08/2005, 10:37 AM32