Filter
Top Products
40
Setting the sleep timer
You can use the sleep timer to automatically turn off the TV at a set time.
To set the sleep timer:
Repeatedly press SLEEP on the remote control to set the length of
time until the TV turns off. The clock will increase 10 minutes for each
press of the SLEEP button (0h00m, 0h10m, ...1h50m, 2h00m.) After
the sleep timer is programmed, the display will appear briefly every
ten minutes to remind you that the sleep timer is operating.
To confirm the sleep timer setting:
Press SLEEP one time. The remaining time will be momentarily
displayed.
To cancel the sleep timer:
Repeatedly press SLEEP until the display turns to 0h00m.
Using the closed caption feature
The Closed Caption feature has two options:
• Captions—An on-screen display of the dialogue, narration, and
sound effects of programs and videos that are closed-captioned
(usually identified in your local TV listings as “CC”).
• Text—An on-screen display of information not related to the program,
such as weather or stock data (if available in your viewing area).
To view captions or text:
1. Tune the TV to the desired program.
2. Press MENU, and then press
or to display the SETUP menu.
3. Press ▲ or ▼ to highlight CLOSED CAPTION.
4. Press
or to select the desired Closed Caption mode, as follows:
• To view captions, select C1 or C2 (C1 displays translation of the
primary language in your area.)
Note: If the program or video you selected is not closed-
captioned, no captions will display on-screen.
• To view text, select T1 or T2. Note: If text is not available in your
viewing area, a black rectangle may appear on-screen.
If this happens, set the Closed Caption feature to OFF.
• To turn the Closed Caption feature off, highlight
OFF in the Closed Caption menu.
Note:
A closed caption signal may not be decoded
in the following situations:
• when a video tape has been dubbed
• when the signal reception is weak
• when the signal reception is non-standard
SETUP
CLOSED CAPTION
PICTURE SIZE
PICTURE SCROLL
CINEMA MODE
ASPECT
IMAGE TILT
:SELECT :ADJUST
OFF
C1 / C2 / T1 / T2 / OFF
VIDEO
ON
0
PICTURE
CableClear
COLOR
TEMPERATURE
DISPLAY FORMAT
SVM
RESET
:SELECT :ADJUST
ON
COOL
1080i
HIGH
Resetting your picture adjustments
The RESET function returns your picture quality adjustments to the
following factory settings:
To reset your picture adjustments:
1. Press MENU, then press
or to display the PICTURE menu.
2. Press ▲ or ▼ to highlight RESET, and then press
.
Mode ............................ sports
Brightness ............ center (25)
Contrast .................. max (50)
Color .................... center (25)
Tint ......................... center (0)
Sharpness............ center (25)
Color temperature ........... cool
SVM ................................ high
MENU
SLEEP
Using the TV’s
Features
NOTICE OF POSSIBLE ADVERSE
EFFECTS ON TV PICTURE DISPLAY
Avoid displaying stationary images on your
TV screen for extended periods of time.
Fixed (non-moving) patterns or images
(including but not limited to PIP/POP
windows, closed captions, video game
patterns, TV station logos, stock tickers,
websites, and special formats that do not use
the entire screen) can become permanently
ingrained in the cathode ray tube(s) of the TV
and cause subtle but permanent ghost
images. This type of damage is NOT
COVERED BY YOUR WARRANTY.
J3U00321B(E)_P34-40 9/08/2005, 10:39 AM40