Toshiba 36A61 CRT Television User Manual


 
17
Reference
Welcome to
Toshiba
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TVs
Features
Appendix
Index
Selecting the signal source
Use the TV/VIDEO button on the remote control or TV to monitor or
change the signal source connected to your TV.
To monitor the signal source:
Press TV/VIDEO once. The current signal source displays in green.
To change the signal source:
Repeatedly press TV/VIDEO to select either VIDEO 1, VIDEO 2,
VIDEO 3, ColorStream, ANT 1, or ANT 2. The selected signal
source displays in green.
TO SELECT PUSH TV/VIDEO
VIDEO 1
VIDEO 2 ANT 1
VIDEO 3
ColorStream ANT 2
Watching video input
To view a signal from other devices connected to your TV
(such as a VCR or DVD player):
Repeatedly press TV/VIDEO on the remote control or TV to select
either VIDEO 1, VIDEO 2, VIDEO 3, or ColorStream. (For device
connection information, see “Connecting your TV” on page 7).
Programming channels into the TVs memory
When you press CHANNEL ▲▼ on the TV or remote control,
the TV stops only on the channels stored in the TV’s memory.
Note: To tune the TV to a channel not programmed into the memory,
use the CHANNEL NUMBERS on the remote control.
Follow the steps below and on the next page to program channels into
the TV’s memory.
Programming channels automatically
Your TV can automatically detect all active channels in your area and
store them in the TV’s memory. After the channels are stored automati-
cally, you can manually add or erase individual channels (see page 18).
If you use both ANT-1 and ANT-2 terminals, you will need to program
channels for each signal source.
To program channels automatically:
1. Press MENU.
2. Press
x or to highlight the SET UP menu.
3. Press
y or z to highlight TV/CABLE.
4. Press
x or to highlight TV (if you use an antenna) or CABLE (if
you use cable).
5. Press
z to highlight CH PROGRAM.
MOVE SELECT
[
]
[
]
LANGUAGE:
ANT1/2:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
MORE
[ENGLISH]
FRANCAIS ESPANOL
[ANT1] ANT2
[TV] CABLE
[ADD] ERASE
SET UP
MOVE SELECT
[
]
[
]
LANGUAGE:
ANT1/2:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
MORE
[ENGLISH]
FRANCAIS ESPANOL
[ANT1] ANT2
[TV] CABLE
[ADD] ERASE
SET UP
(Continued on next page)
MENU
yzx •
TV/VIDEO
CHANNEL
yz
MENU TV / VIDEO VOLUME CHANNEL POWER
CH RTN
ADV/
PIP CH
ADV/
PIP CH
LIGHT
MUTE TV/VIDEO TIMER
RECALL
POWER
TV
CABLE
VCR
ENT
ENTER
FAV
FAV
C.CAPT
EXIT
MENU
RESET
1
4
2
5
3
6
7
8
9
0
100
Channel
Numbers
MENU
TV/VIDEO
CH
CH (Channel)
VOL