Filter
Top Products
9
Reference
Welcome to
Toshiba
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Connecting a DVD player or satellite receiver
and a VCR
This connection allows you to watch DVD/satellite, VCR, or TV
programs. You can record from the DVD player/satellite receiver or
TV. You can also record one TV channel while watching another
channel.
Note: If your DVD player has component video connections, follow
the connection instructions under “Connecting a DVD player with
ColorStream
™
(component video) and a VCR” on page 10.
You will need:
• one coaxial cable
• three pairs of audio cables (one pair and two single audio cables
for a mono VCR)
• two regular video cables
• one S-video cable
ANT (75Ω)
IN
OUT DVD IN
Stereo VCR
DVD / Satellite Receiver
To Satellite
To Antenna
Note:
You can use a regular video cable instead of
an S-video cable between the TV and DVD
player/satellite receiver, but the picture quality
will decrease.
The illustration at left shows one S-video
cable and one pair of audio cables connected
from the DVD player/satellite receiver to
Video-1 on the TV.
Do not connect a regular video cable and an
S-video cable to Video-1 (or Video-2) at the
same time. Doing so will distort the picture.
When recording, set Audio Out to FIX
(see “Selecting variable audio OUT”
on page 35). With Audio Out set to
FIX, the TV’s volume setting during
recording will not affect the sound
level being recorded.