Filter
Top Products
28
HL196 (E/F) Web 213:276
Chapter 4: Setting up your TV
Viewing the CableCARD
™
menu
A CableCARD
™
enables you to view encrypted digital
channels. See “Connecting a digital CableCARD
™
”
(- Installation Guide) for connection and subscription
information.
Note: Connecting your TV directly to the Audio/Video output of
your set-top-box may provide a more vivid picture.
After the CableCARD
™
is inserted, a CableCARD
™
option
appears in the Applications menu, with informational
screens provided by your digital CableCARD
™
service (see
illustrations below).
To view the CableCARD
™
menu:
1 Press Y and open the Applications menu.
2 Highlight CableCARD
™
and press c.
3 Press B or b to select one of the side menu items and then
press T to display the information.
Note: The CableCARD
™
menu is for informational
purposes only and has no user-adjustable options.
Viewing the digital signal meter
You can view the digital signal meter for the ANT 1 and
ANT 2 digital TV input sources only.
To view the digital signal meter:
1 Press Y and open the Setup menu.
2 Highlight Installation and press T.
3 A new set of Installation menu icons will appear, as shown
below.
Open the Terrestrial menu, highlight Signal Meter,
and press T.
4 Press BbC c to select the antenna input and digital
channel whose signal you want to check.
Note: The physical digital channel number listed in the
Signal Meter screen may not correspond to a virtual TV
channel number. Contact your local broadcasters to
obtain the RF channel numbers for your local digital
stations.
To close the screen and return to the Terrestrial
menu:
Highlight Done and press T.
To return to normal viewing:
Press O.
CableCard Connected -- Acquiring
channel information.
CableCard services will only operate
with cable signal connected to Antenna 1.
CH RTNENTER
EXIT
Navigate
Select
Back Exit
Applications
Audio Player
Channel Browser
Picture Viewer
Digital CC/Audio Selector
CableCARD
TV Guide On Screen
IP Service
Conditional Access
CableCARD(tm) Status
Network Setup
CableCARD(tm) Pairing
CH RTNENTER
EXIT
Navigate
Select
Back Exit
Terrestrial
Input Configuration
Channel Program
Channel Add/Delete
Signal Meter
Signal Meter
Antenna 1
Physical Digital Channel 4
Virtual Digital Channel
Done
4-1
Signal Locked
0
0
Peak
HL196_EN.book Page 28 Friday, June 2, 2006 2:35 PM