Filter
Top Products
31
SET UP for Input Signals
COLOR SYSTEM / AUTO
Select SIGNAL from the “SET UP” menu during VIDEO (S-VIDEO) input
signal mode. (“SIGNAL [VIDEO]” menu is displayed.)
Press to select the “COLOR SYSTEM” or “AUTO”.
SELECT
SET UP
SIGNAL
COMPONENT/RGB-IN SELECT
RGB
OSD LANGUAGE
ENGLISH
(
US
)
RETURN
Mode
Color system
AUTO (4:3)
Press to select each function.
Function
Set the color system to match the input signal. If set to “AUTO”, the color system
is determined automatically.
Set to “NORMAL” to view 4:3 images in an unchanged format when
AUTO is selected. If you would like to view 4:3 images in “Just” format, set
to “JUST”.
AUTO PAL SECAM M NTSC NTSC
CHANGE
SELECT
3D Y/C FILTER
(
NTSC
)
COLOR SYSTEM
AUTO
(
4:3
)
ON
AUTO
NORMAL
SIGNAL
[
VIDEO
]
RETURN
Press
(store) button
If the picture image becomes unstable:
With the system set on Auto, under conditions of
low level or noisy input signals the image may in
rare cases become unstable. Should this occur,
set the system to match the format of the input
signal.