Filter
Top Products
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
15
(E) 46H84 51H84 57H84 65H84
Connecting a HDMI device to the HDMI input
HDMI
1
(High Definition Multimedia Interface) is the first all digital
consumer electronics A/V interface that supports an uncompressed
standard. One jack supports both video and audio information.
The HDMI input on your TV is designed to accept HDMI program
material in digital form from EIA/CEA-861/861B–compliant
2
consumer electronic devices, such as a set-top box or DVD player
equipped with a HDMI or DVI output connection.
3
Applicable video signals
Note: This TV is not intended for connection to
and should not be used with a PC (personal
computer).
You will need:
• one HDMI cable (this HDMI connecter is type A.)
Note: For proper operation, the HDMI cable length
should not exceed 3m (9.8 ft). The recommended
length is 2m (6.6 ft).
VIDEO AUDIO
LR
IN
OUT
HDMI OUT
TV
Notes:
1
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing
LLC.
2
EIA/CEA-861/861B compliance covers the
transmission of uncompressed digital
video with high-bandwidth digital content
protection, which is being standardized for
future reception of high-definition video
signals.
3
Consult your consumer electronics dealer
for availability.
Caution:
To ensure that the HDMI device is reset
properly, it is recommended that you follow
these procedures:
• When turning on your electronic
components, turn on the TV first,
and then the HDMI device.
• When turning off your electronic
components, turn off the HDMI device
first, and then the TV.
HDMI device
(for example, set top box or DVD player)
No. of dots (H
××
××
×V) Vertical frequencies
1080i 1920×1080i 59.94/60Hz
720p 1280×720p 59.94/60Hz
720×480p
480p 640×480p 59.94/60Hz
480i 720×480i 59.94/60Hz