Filter
Top Products
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
16
(E) 46H84 51H84 57H84 65H84
Connecting a DVI device to the HDMI input
• one HDMI–DVI conversion cable
• one pair of standard audio cables
VIDEO AUDIO
LR
IN
OUT
DVI
OUT
Connecting an audio system
This connection allows you to use external speakers connected to an
audio amplifier and control volume levels with the TV.
To control the audio, turn on the TV and the stereo amplifier, and
turn off the built-in speakers (see “Turning off the built-in speakers”
on page 56).
You will need:
• one pair of audio cables
Note:
To hear sound when using an external audio amplifier, the
volume of both the TV and the amplifier must be set
above 0 (zero).
For example, if the volume of the TV is set to 0, you will
not be able to hear any sound, even the volume of the
amplifier is at its highest level.
DVI device
(for example, set-top box or DVD player)
TV
LINE IN
LR
TV
Amplifier
If the external device has DVI output
only, use an HDMI–DVI conversion
cable to connect to the HDMI jack on
the TV. Also, connect the AUDIO OUT
signal from the external device (set-top
box or DVD player) to the AUDIO IN
jacks next to the HDMI input.
Note:
• Some DVI or HDMI devices may not be
available for this TV.
* If the AUDIO (analog) cable is connected,
the HDMI terminal does not output audio
signals (digital).
*