Filter
Top Products
23
Chapter 2: Connecting your TV
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
(E) 56/62/72MX195
Connecting a device to the IR blaster
(continued)
Using the TheaterNet
™
IN:
For additional control options for your home theater system, you
can connect an IR receiver/repeater (not included) or a home theater
control system (not included) to the TV’s TheaterNet IN terminal.*
Contact your home theater electronics dealer for details about home
theater control systems.
You will need:
one IR cable
With this connection, point the
Toshiba TV remote control at
the front of the IR receiver/
repeater or home theater control
system to operate the TV.
* The TheaterNet OUT function has been verified for use with Toshiba infrared-
controlled devices. The TheaterNet IN function has been verified for use with
SmarTouch™ STS/STS-C wireless RF control systems. Due
to the wide variation in remote control operation among manufacturers, these
functions may or may not operate with other brands.
SmarTouch is a trademark of Crestron Electronics, Inc. (www.crestron.com).
TV back panel
For additional control options for
your home theater system, set up
the TheaterNet on-screen device
control feature. You can use this
feature to control many IR remote-
controlled devices and IEEE1394
devices using the on-screen control
icons.
See pages 50–54 for details on setting up
and using TheaterNet.
See pages 25–27 for details on
connecting IEEE1394 devices.
TheaterNet
™
on-screen device control
Note: The TheaterNet on-screen icons are the only device functions
available when the icons are on-screen. To access other device
functions, close the TheaterNet icon window.
ENTER
EXITTOP MENU
Toshiba Video 3
Back of IR receiver/repeater or home
theater control system* (not included)
IN
OUT
IR receiver/repeater
or home theater
control system