Filter
Top Products
Setting up
your TV
14
VOLUME CHANNEL
TS ts
TV/VIDEO
MENU
Adding and erasing channels manually
After you’ve programmed the channels, you can add or erase specific
channels.
To add or erase channels:
1. Select the channel you want to add or erase using Channel
y or z. If
adding channels, you must select the channel to add by using the
Channel Number buttons.
2. Press MENU, then press
x or • to highlight the SET UP menu.
3. Press
y or z to highlight ADD/ERASE.
LANGUAGE:
ANT1/2:
TV/CABLE:
CH PROGRAM
MORE
SELECT[ ]
[ENGLISH]FRANCAIS
ESPANOL
[ANT1]ANT2
[TV]CABLE
ADD/ERASE:
[ADD]ERASE
AUDIO
PREFER
SET UP
C.CAPT
PICTURE
4. Press x or • to select ADD or ERASE, whichever function you
want to perform.
5. Repeat steps 1-4 for other channels you want to add or erase.
Changing channels
To change the channel, you can:
• change the programmed channels using the remote control
• select a channel directly using the remote control
• scan the channels using the TV buttons
To change to the next programmed channel:
Press Channel
y or z on the TV or remote control.
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0-9 and 100).
For example, to select channel 125, press the 100 button, the 2
button, and the 5 button.
CH RTN
CH
VOL VOL
CH
EXIT
MUTERECALL
POWER
ENT
1
4
7
2
5
8
3
6
9
0
100
Menu/Enter
TV
CABLE
VCR
MENU/
ENTER
Exit
Channel
Number
T/S/t/s
TV/VIDEO
VOLUME T/S
CHANNEL s/t
MENU