Filter
Top Products
3
Reference
Welcome to
Toshiba
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
AppendixIndex
Connecting a cable converter box
This connection allows you to watch cable and premium channels.
To use the TV features (such as PIP swap, Channel
y z, channel
block, favorite channels, or channel labels ), select ANT-1. To view
premium channels, select ANT-2, tune the TV to channel 3 or 4
(whichever channel is vacant in your area), and use the converter box
to change channels.
You will need:
• two coaxial cables
ANT-1 OUT
ANT (75Ω)
ANT-2
INOUTDVD IN
VIDEO
COLOR
STREAM
INPUT
VIDEO 2 VIDEO 1
MONO
L/MONO
VIDEO
S VIDEO
L
R
AUDIO
L
R
AUDIO
R
AUDIO
Y
Cb
Cr
From Cable
cable converter box
IN OUT
Connecting a cable converter box and VCR
This connection allows you to watch and record basic and premium
cable channels, as well as watch videotapes. Change the TV to Video
mode. Tune the VCR to channel 3 or 4 (the same channel as the
converter box output switch). Use the cable converter box to change
channels. Set the PIP source to TV mode (see page 24).
You will need:
• three coaxial cables
• one pair of audio cables (one single cable for a mono VCR)
• one video cable
• one cable splitter
ANT-1 OUT
ANT (75Ω)
ANT-2
INOUTDVD IN
VIDEO
COLOR
STREAM
INPUT
VIDEO 2 VIDEO 1
MONO
L/MONO
S VIDEO
L
R
AUDIO
L
R
AUDIO
R
AUDIO
Y
Cb
Cr
Stereo VCR
VIDEO AUDIO
OUT
IN from ANT
CH 3
CH 4
OUT to TV
LR
IN
TV
VIDEO
cable converter box
IN OUT
cable splitter
IN
OUT
OUT
From Cable
Note:
When you use a converter box with your TV,
there may be features you will not be able to
program using the remote control, such as
such as PIP swap, Channel y z, channel
block, favorite channels, or channel labels.
Note:
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
If you have an S-VHS VCR, use the S-video
connections and omit the video cable.
Caution:
Do not connect the video cable and the
S-video cable to Video-1 simultaneously.