Filter
Top Products
27
RECORDING
Program 1
(Start time)
Overlapped portion
(not recorded)
Program 2
(Start time)
Confirming the timer programs
Press
PROG
. during timer recording mode.
The screen for confirming will appear.
Press
PROG
. again to exit from confirmation
page.
Changing/cancelling the timer
programs
1)If the TIMER indicator is lit , press both TIMER
to turn it off and then turn the VCR on by
pressing VCR
POWER.
2)With steps 2 to 9, change the items.
To cancel a program, select the program you
want to cancel in step 4, and press
CANCEL.
The line is then cleared.
3) Press both
TIMER
to return to the timer
standby mode .
Error indication
The “--E-” ( Error ) indicator appears in the VCR
display if you press both
TIMER
when:
–– a cassette is not loaded.
–– the loaded cassette has no safety tab.
–– timer recording is in progress.
In these cases, a recording can not be made.
To cancel the Timer Recording
By pressing the
POWER
button on the front
panel of the VCR, it will cancel the timer
recording and go to standby.
P
M
P
M
Overlaps of the programs
If two timer programs overlap, the recording
start time of program 1 has priority over the
recording off time of program 2.
If a power failure occurs during
the timer program recording
• When a power failure has occurred, the
programmed contents are not affected,
reset the clock.
W-627 Eng (24-28) 2/28/02, 3:28 PM27