Toshiba W-727 VCR User Manual


 
16
Incoming Antenna/Cable(CATV) Signals
The VCR scans through all receivable TV and CATV channels and stores only the active
ones in your area into the memory. Once the storing is finished, you can select a desired
channel using
CH/TRK
.
Preparation
Turn on the TV, and select the video channel (3 or 4), or the video input mode if you made the Audio/Video
connection (page 11).
Press
I.SELECT
so that the channel number will appear if L1 or L2 is displayed in the VCR display.
Incoming Antenna/Cable(CATV) Signals
1
Press
PROG
. to display the MENU screen.
2
Select PRESET using
FF
or
REW
,
and press
ENTER
.
3
Select CH MEMORY using
PLAY/x2
or
STOP
, and press
ENTER
.
4
Set TV/CATV to TV or CATV using
FF
or
REW
.
TV: To store channels received via the antenna.
CATV: To store channels received via the incoming cable.
5
Select AUTO SCAN using
PLAY/x2
or
STOP
, and press
FF
to
set to ON.
The VCR starts scanning and the
channels are stored in the VCR in
ascending order. When the scanning is
finished, the screen automatically
returns.
6
Press
PROG.
twice to exit.
PREPARATION
Storing Channels on the VCR
This section is required if you receive only normal TV or unscrambled cable channels, or use a cable box
between your TV and the VCR.
AUTO SCA
n
2 CH on
TV
VCR
PROG. ENTER
TV/VCR
POWER
CH/TRK
TV VOL
I.SELECT
REMAIN/
COUNTER
DISPLAY
COUNT RESET
SP/SLP
REC
TIMER
SLOW
PLAY/x2
PAUSE/STILL
REW FF
CANCEL
A.SELECT
EJECT
VCR Plus+
CH
CABLE BOX
CM SKIP
POWER
1
2
3
456
7
8
9
0
Number
buttons
100
CURSOR
STOP
1,6
ENTER
PLAY/x2,
STOP
REW
I.SELEC
T
100
FF
W-727/Eng (10-18) 2/28/02, 3:56 PM16