Filter
Top Products
19
PLAYBACK
Adjusting the tracking
When playback starts, the VCR automatically adjusts the tracking for clear pictures and sound
(Digital Auto Tracking).
If the VCR cannot locate the best possible tracking point, hold down one of
CH/TRK
to adjust the
tracking manually.
Notes
• During the adjusting, the playback picture and sound may be distorted.
• The digital auto tracking is activated only in the playback mode.
• The noise on the screen may not be completely eliminated depending on the tape used, especially when the
tape was recorded on another VCR.
Basic Playback
1
Load a recorded cassette.
Power is turned on.
If the cassette has no safety tab,
playback starts automatically.
2
Press
PLAY/x2
to start playback.
3
To stop playback, press
STOP
.
To resume normal playback Press
PLAY/x2
.
Rewinding / Fast-forwarding
Press
REW
or
FF
on the Remote control, turn
REV
or
FWD
on
the VCR in the stop mode.
S
SLP
VCR
REC
L
TIMER
PLAYBACK
Playback
This section explains the basic playback operation.
Preparation
• Select the video channel (3 or 4) or video input mode on the TV.
• Press VCR to set the remote control operating the VCR.
VCR
REC
L
TIMER
TV
VCR
PROG. ENTER
TV/VCR
POWER
CH/TRK
TV VOL
I.SELECT
REMAIN/
COUNTER
DISPLAY
COUNT RESET
SP/SLP
REC
TIMER
SLOW
PLAY/x2
PAUSE/STILL
REW FF
1
2
3
456
7
8
9
CANCEL
A.SELECT
EJECT
0
100
VCR Plus+
CH
CABLE BOX
CM SKIP
POWER
CH/TR
K
CURSOR
3
2,
FF
REW
STOP
1
Press
PLAY/x2
during playback.
A tape runs at double speed
playback.
Double Speed Playback
S-VHS Quasi Playback (SQPB)
• This VCR can also play back at tape which is recorded in S-VHS format.
But the playback pictures does not have the same quality and resolution as the
original S-VHS playback picture.
• This VCR cannot record in S-VHS format.
• SQPB is an abbreviation for S-VHS Quasi Playback.
VCR
W-727/Eng (19-23) 2/28/02, 3:57 PM19
Black