Filter
Top Products
20
Frame Setup (XVSe & DVSe)
Note The red FPS record slider cannot exceed the blue FPS capture slider
Note The software will not allow the maximum available frames to be exceeded.
Note Using H.264 software compression significantly increases the processing load on the Surveillix DSVe and XVSe platforms. If
maximum analog PPS is desired in addition to IP video recording or multiple remote clients, Surveillix engineering recommends
the addition of the upgraded system CPU (DVR-CPU UPG).
Frame Select
Blue Slider: Set the frame rate to be recorded during intensive recording and available for viewing on a remote client PC.
Red Slider: Set the frame rate recorded by during normal recording.
Resolution
Adjusting resolution will effect the total number of frames per second that are available.
Codec
Select the appropriate codec for each camera: MJPEG, MPEG-4, or H.264.
Video Quality
Lower quality video has a smaller file size but appears more pixilated.
Sensitivity
Set the Keyframe refresh rate. Adjusting this setting can result in poor video quality.
Note Do not change the default setting unless instructed by a system administrator.
Reset to Default Settings
Sensitivity
Video Quality
Recording Resolution
Frame Select
Number of Recording
Frames Selected
Compression Codec
Camera Channel