Filter
Top Products
CNT-PRC002-EN 11
Figure 10 shows the interior of the
Tracer MP581 NEMA-1 enclosure.
Significant space is available for wiring
inputs and outputs. Wires should be
routed after the optional pressure
sensor is installed.
Tracer MP580 enclosure configurations
are customized in the factory to meet
customer requirements.
For interior details of a Tracer MP581
used in a smoke control system, see
Applications Guide, Engineered Smoke
Control System for Tracer Summit, BAS-
APG001-EN.
Figure 10. Tracer MP581 enclosure interior
Line-to-low voltage
power transformer
Main circuit board
Termination board
Mounting location
for optional static
pressure sensor
Space for input and
output wire-routing
Enclosure interior