Filter
Top Products
CNT-PRC002-EN 9
Figure 8 shows typical input and output
connections to the Tracer MP581
termination board. The Tracer MP581
termination board uses screw terminals.
The Tracer MP580 termination board
uses 0.25-inch quick-connect terminals.
Figure 9 on page 10 shows typical input
and output connections to the EX2
expansion module.
For wiring within a smoke control
system, see Applications Guide,
Engineered Smoke Control System for
Tracer Summit, BAS-APG001-EN.
Figure 8. Wiring diagram for the Tracer MP580/581
0–20 mA sensor
Temperature sensor
<300 ft
(100 m)
<1000 ft
(300 m)
0–10 Vdc output
Load > 500 Ω
Powered output
<1000 ft
(300 m)
<1000 ft
(300 m)
Wiring diagrams
I/O bus to EX2
expansion modules up
to 1000 ft (300 m)