Filter
Top Products
INSTALLING BATTERIES
1. On the back of the remote control,push the
tab and lift off the battery cover.
2. Locate the two (2) enclosed AA batteries.
Match the + and – marks with those in the
battery case,then insert them.
3. Align the cover’s keys with the case’s holes
and press the cover back into place.The tab
should click when the cover is locked.
4. Test the remote control by pressing
any mode key (e.g.,TV).If the batteries are
inserted correctly, the LED (red light) will
blink once
NOTE: When batteries need replacement,the remote control will
cease to operate.Replace the batteries and the unit will be restored
to its full functionality, complete with your favorite settings.
9
❶
❸
❷
Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 9