Filter
Top Products
SEARCHING FOR YOUR CODE
If your TV,VCR,or Cable Converter does not respond to
the Millennium 3 after trying all of the codes listed for
your brand,or if your brand is not listed at all,try search-
ing for your code.
For example,to search for a code for your TV:
1. Turn on your TV.
2. On the Millennium 3,press and hold SETUP
until the LED blinks twice,then release SETUP.
3. Enter 9 - 9 - 1.The LED will blink twice.
4. Aim the remote control at the the TV and slowly
alternate between pressing ▲▲ and TV.
Stop when the TV turns off.
NOTE: In the search mode,the Millennium 3 will
send IR codes from its library to the selected compo-
nent,starting with the most popular code first.
5. Press SETUP once to lock in the code.
6. To search for the codes of other components,
repeat steps 1 through 5,but substitute the
appropriate key (i.e.,VCR or CBL) for the (VCR
or Cable) component you are searching for.
22
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 22