Filter
Top Products
To search for the Television, Video Recorder, Satellite
Receiver, Cable Converter or CD Player code to be set up
on your AUX key, follow these steps:
Make sure you have set the AUX key to TV, Video,
Satellite, Cable or CD operation (see steps 1 & 2 on
pages 11 or 12).
Switch your device on.
Press the
AUX key on your
ONE FOR ALL 5.
Aim the ONE FOR ALL 5 at
your device.
Press and hold
down MAGIC
until the ONE
FOR ALL 5’s red light blinks
twice. Then, press
9 9 1. The
red light will blink twice.
Now, alternate between
POWER and AUX, over and
over, until your device turns off.
You may have to press these keys
many times, so please be patient.
Remember to keep pointing your
ONE FOR ALL 5 at your device
when you press the POWER and
AUX keys.
When your device turns off,
press and release
MAGIC.
Don’t forget, press MAGIC as
soon as your device turns off.
Now the ONE FOR ALL 5 is ready to run your device.
When you want to control this device, press AUX first.
■■■■
■■■■
14
1
2
3
4
5
6
AUX
AUX
N
ote: If your Video or CD’s original remote control
does not have a power key, press PLAY when
searching for your code.