Filter
Top Products
Setting Up Your Video Recorder
To set up the ONE FOR ALL 5 for your Video Recorder:
Find your Video Recorder
code in the Set-Up Code
section (starting on page 30).
Codes are listed by brand
name. The most popular
code is listed first. Switch on
your Video Recorder and
insert a blank tape.
Press and release the ONE
FOR ALL 5’s
VCR key, then
press and hold down the
MAGIC key
until the ONE
FOR ALL 5’s red light blinks
twice.
Enter your
three-digit VCR
code using the number keys.
The red light will blink
twice.
Now, aim the ONE FOR
ALL 5 at your Video
Recorder and then press
PLAY. If your Video starts
playing the tape, your ONE
FOR ALL 5 is ready to run
your Video Recorder.
Write your code in the three boxes on page 29, for easy
future reference.
To control your Video Recorder, press the VCR key first.
If your Video Recorder does not respond, follow steps 1
through 4 with each code listed for your brand. If none of
the codes listed for your brand operate your Video
Recorder, then try the search method described on page
13, even if your brand isn’t listed at all. If you change
programmes on your Television through your Video
Recorder, press VCR and not TV, before you use the
programme keys.
■■■■
■■■■
8
1
2
3
4
VCR
PLAY
ONE FOR ALL
Fernseher
Admiral 087 093 264
163
Agazi 264
AGB 075
Aiko 216 009
Akai 208 351 037