Filter
Top Products
RCA DSS 0566, 0143, 0855
Sony DBS 0639
Star Choice DBS 0869
STS 0210
Toshiba DBS 0790
Uniden DBS 0724, 0722
Zenith 0856
Programming the AUX Key:
The AUX key is already set up to accept codes for a second
Receiver/Tuner, Amplifier or other audio component. If you
would like to set up the AUX key for an audio component,
follow the instructions listed below. If you would like the AUX
key to control a second TV, VCR, Cable Converter or other
component, follow the instructions in the “Re-assigning
Device Keys” section to re-assign the AUX key to accept
codes for other components. For example, if you are setting
up an Amplifier:
Locate the brand name of your Amplifier and then write it in
the space below.
Amplifier Brand: ____________________________
Locate the brand name of your Amplifier in the “Setup Codes
For Integrated Amplifiers/ Preamplifiers/Amplifiers” section
(starting below), and write it in below.
The brands are listed in alphabetical order with the most
popular codes listed first.You will use one of these codes to
program your Cinema 7+™ to operate your Amplifier as fol-
lows:
1. Turn on your Amplifier.
2. Press AUX and release. Press and hold SETUP until
the Cinema 7+™’s red light blinks twice, then release
SETUP.
3. Enter the first four-digit Amplifier code listed for your
brand in the “Setup Codes For Amplifiers” section. If
performed correctly, the red light will blink twice
when you enter the final digit of your code.
4. Aim the Cinema 7+™ at your Amplifier and press
POWER.Your Amplifier should turn off. If your
Amplifier does not respond, repeat steps 2-4, trying
each code listed for your brand until you find the one
that operates your Amplifier.
NOTE: If you have tried all the codes listed for your
brand and your Auxiliary Component does not
respond, try using the search method found on page
22.
5. Your Cinema 7+™ is now programmed to operate
your Amplifier. Write your Amplifier code in the boxes
to the left for future reference.
Remember, if you want to use your Cinema 7+™ to operate
your Amplifier, press the AUX key first.
Setup Codes For Integrated Amplifiers/
Preamplifiers/Amplifiers
Aiwa 0406
Carver 0269
Hytex 0007
Jasco 0153, 0315, 0015
Jerrold 0476, 0003, 0014, 0011, 0012, 0015, 0810
Linsay 0440
Magnavox 0027, 0014
Memorex 0000
Movie Time 0063, 0156
Novaplex 0618
Setup Codes for Cable Converters (continued)
NSC 0063, 0156
Oak 0007, 0019
Optimus 0021
Panasonic 0021, 0107, 0000
Panther 0637
Paragon 0000
Philips 0153, 0027, 0031
Pioneer 0144, 0023, 0533
Popular
Mechanics 0400
Prelude 0770
Pulsar 0000
RadioShack 0015, 0315, 0797, 0833
RCA 0021
Realistic 0207
Recoton 0400
Regal 0259, 0020
Regency 0002
Rembrandt 0011
Runco 0000
Samsung 0144, 0040
Scientific Atlanta 0477, 0008, 0017
Seam 0510
Signal 0015, 0040
Signature 0011
SL Marx 0040
Sprucer 0021
Starcom 0003, 0015
Stargate 0015, 0040, 0797
Starquest 0015
Sylvania 0001
Tandy 0258
Teleview 0040
Texscan 0001
TFC 0310
Timeless 0418
Tocom 0012, 0013
Toshiba 0000
Tusa 0015
TV86 0063
Unika 0153, 0022, 0207
United Artists 0007
United Cable 0003
Universal 0153, 0022, 0056, 0191, 0207
Videoway 0250
Viewstar 0063, 0027, 0258
Zenith 0525, 0000, 0015, 0207, 0008
Zentek 0400
Setup Codes for Satellites
AlphaStar DBS 0772
Chaparral 0216
Echostar DBS 0775
ExpressVu DBS 0775
General
Instrument 0361, 0627, 0869
Hitachi DBS 0819
HTS DBS 0775
Hughes Network
Systems DBS 0749
Jerrold Primestar 0627
Jerrold 0361
JVC 0775
Magnavox DBS 0722, 0724
Memorex DBS 0724
Panasonic DBS 0701
Philips DBS 0722, 0724
Primestar 0361, 0627
Proscan 0566
2120
Web Site :http://www.oneforall.com Web Site :http://www.oneforall.com