Filter
Top Products
Denon 0059
Mitsubishi 0059
NAD 0059
Pioneer 0059
Sony 0193, 0201
Programming the Cinema 7+™ to operate your
Receiver/Tuner:
Locate the brand name of your Receiver/Tuner in the “Setup
Codes For Receiver/Tuners” section (starting below), and
write it in below.
Receiver/Tuner Brand: ______________________
The brands are listed in alphabetical order with the most
popular codes listed first.You will use one of these codes to
program your Cinema 7+™ to operate your Receiver/Tuner
as follows:
1. Turn on your Receiver/Tuner.
2. Press RCVR and release. Press and hold SETUP
until the Cinema 7+™’s red light blinks twice, then
release SETUP.
3. Enter the first four-digit Receiver/Tuner code listed
for your brand in the “Setup Codes For
Receivers/Tuners” section. If performed correctly, the
red light will blink twice when you enter the final
digit.
4. Aim the Cinema 7+™ at your Receiver/Tuner and
press POWER.The unit should turn off. If it does not
respond, repeat steps 2-4, trying each code listed for
your brand until you find one that works.
NOTE: If the unit still does not respond, try using the
search method on page 22.
5. Your Cinema 7+™ is now programmed to operate
your Receiver/Tuner. Write your Receiver/Tuner code
in the boxes to the left for future reference.
Remember, to use your Cinema 7+™ to operate your
Receiver/Tuner, press the RCVR key first.
Setup Codes For Receivers/Tuners
ADC 0531
Akai 0076
Aiwa 0121, 0158, 0189, 0405
Bang & Olufsen 0898
Capetronic 0531
Carver 0008, 0042, 0189, 0360
Casio 0195
Clarinette 0195
Curtis Mathes 0039, 0080
Denon 0004
Fisher 0042, 0360
Garrard 0463
Harman/Kardon 0110, 0891, 0189
JBL 0110
JVC 0074
Kenwood 0027, 0313, 0314, 0186, 0042
Linn 0189
Lloyd’s 0195
LXI 0181
Magnavox 0189, 0195, 0531, 0391
Marantz 0039, 0189
MCS 0039
1716
Web Site :http://www.oneforall.com Web Site :http://www.oneforall.com
Modulaire 0195
NAD 0320
Nakamichi 0097
Onkyo 0135, 0380
Optimus 0042, 0080, 0181, 0186, 0531, 0670, 0738, 0801
Panasonic 0039, 0309, 0518
Setup Codes For Receivers/Tuners (continued)
Penney 0195
Philips 0189
Pioneer 0014*, 0080*, 0150, 0531, 0630, 1023
Quasar 0039
RCA 0054, 0360, 0531, 0530
Realistic 0181, 0195
Sansui 0189
Scott 0322
Sharp 0186
Sherwood 0491, 0502
Sony 0158**, 0474
Soundesign 0670
TEAC 0463
Technics 0039, 0309, 0518
Victor 0074
Wards 0014, 0042, 0054, 0080, 0158, 0189
Yamaha 0176, 0186
Yorx 0195
Zenith 0857
*May use Amplifier code 0013 for power and volume. See page 21 for ampli-
fier setup and codes.
**May use Misc. Audio code 0159 to operate surround and tuner presets.
See page 24 for misc. audio setup and codes.
Programming the Cinema 7+™ to operate your CD
Player:
Locate the brand name of your CD Player in the “Setup Codes
For CD Players” section (starting on the next page), and write
it in the space below.
CD Player Brand: __________________________
The brands are listed in alphabetical order with the most
popular codes listed first.You will use one of these codes to
program your Cinema 7+™ to operate your CD Player as fol-
lows:
1. Turn on your CD Player and insert a disc.
2. Press CD and release. Press and hold SETUP until
the Cinema 7+™’s red light blinks twice, then
release SETUP.
3. Enter the first four-digit CD Player code listed for
your brand. If performed correctly, the red light will
blink twice when you enter the final digit of your
code.
4. Aim the Cinema 7+™ at your CD Player and press
PL (Play).Your CD Player should play your disc. If it
does not respond, repeat steps 2-4, trying each
code listed for your brand until you find the one that
operates your CD Player.
NOTE: If you have tried all the codes listed for your
brand and your CD Player does not respond, try
using the search method found on page 22.
5. Your Cinema 7+™ is now programmed to operate
your CD Player. Write your CD Player code in the