Filter
Top Products
PPaaggee 22
MMRRFF--220000 BB
AASSEE
SS
TTAATTIIOONN
Features and Benefits
NNoo MMoorree PPooiinnttiinngg -- RRaaddiioo WWaavveess PPeenneettrraattee WWaallllss,, DDoooorrss aanndd FFlloooorrss
The MRF-200 receives the RF signals of the MX-800 remote control from any
direction. You no longer need to point the remote control at any of your A/V
components. You can also place the components distracting blinking lights and
displays behind closed doors and/or in another room!
RReelliiaabbllee CCoonnttrrooll TThhrroouugghhoouutt YYoouurr HHoouussee
The MRF-200 receives RF signals from your MX-800 from within a radius of
50 to 100 feet enabling you to control out of sight audio/video components
behind walls and closed doors. Range depends on the structure of your home
and the amount of interference generated by computers, microprocessors and
other devices within and nearby your home.
UUpp TToo SSiixxtteeeenn EEqquuiippmmeenntt LLooccaattiioonnss CCoonnttrroolllleedd FFrroomm AAnnyy MMXX--880000
Each MX-800 can be programmed to operate equipment placed throughout
the house, by installing an MRF-200 base station at each location. Each MRF-
200 is assigned one of 16 unique ID#’s. In operation it’s simple: when you
select a device located in the Den, the MX-800 only talks to the MRF-200 in
the Den. When you select a device located in the Family Room, the MX-800
only talks to it!
NNoo PPooiinnttiinngg RReemmoottee CCoonnttrroollss IInn EEvveerryy RRoooomm
You can opt to control a multi-room or multi-zone system via RF remote con-
trol by placing an MX-800 in each room of your home.
CCoonnttrrooll AA MMeeddiiaa RRoooomm AArrrraayy ooff IIddeennttiiccaall TTVV’’ss
The MRF-200’s unique assignable IR flashers enable your installation to control
up to six identical TV’s. The intelligent routing of the MRF-200 will send your
commands only to the TV you select on your MX-800. The other identical
TV’s will not receive commands. Of course, if your system utilizes identical
satellite receivers, cable boxes, VCR’s or disc changers you can utilize IR rout-
ing just as easily for them. If you have more than six identical components, up
to 16 additional MRF-200’s can be installed to control them (thus allowing up
to 96 identical components in one house).
Parts Guide
The MRF-200 RF Base Station includes:
1 - MRF-200 Receiver with integrated antenna
1 - Mounting Plate for wall mounting the MRF-200
4 - Screws for wall mounting the mounting plate
1 - 9V-300mA Power Supply
6 - Flashers with 10 foot plug in cables.