Filter
Top Products
NOTES:
If your audio/video component does not respond, try the
other codes for your brand. If it still doesn’t respond, try the
Code Search using the followingmethod.
If the LED blinked rapidly when you entered the code, you
may have entered an invalid code. Recheck the code in
the code list (separate sheet) and try again.
SEARCHING FOR CODES
1. Turn on the device you want to control.
2. Press and hold SETUP until the LED
indicator lights steadily. Release Setup
button.
3. Press the mode button that matches the
equipment you want to control. The LED
blinks once.
4. Press CHANNEL + repeatedly* until the
device to be controlled changes channel.
If you accidentally go past the code, press
CHANNEL -repeatedly until the channel
changes again.
5. Press and release the ENTER button to
complete the setup.
*NOTE: You might have to press CHANNEL+ many times
(50+). If the device does not have a Channel Up function,
use the PLAY button (VCR only) or the POWER button.
10
DI-000-HCCUR-00A 7/5/02, 2:19 PM10