Filter
Top Products
TROUBLESHOOTING
The Transceiver Module doesn’t respond to the remote:
• Check the House Code on the Transceiver Module is
set to ‘A.’ If you have changed the House Code on the
remote (see p. 19), check that it matches the House
Code on the module.
•Press the ON/OFF button on the front of the Transceiver
to confirm it operates the equipment connected to it.
The Transceiver Module works, but other modules don’t
respond:
• Check that the Module has the same House Code as
the Transceiver Module.
•Try plugging the Module into a different outlet.
NOTE: when you use an RF Transceiver (such as the HCPRF)
to control Modules, you will be able to control up to 16
Modules. E.G., when you press 1-6-ON you turn on Module
number 16.
The Remote won’t control your Audio/Video equipment, or
doesn’t work at all:
• Use manual controls or the original remote control to
confirm the equipment is working properly.
• Be sure you pressed the device key for the device you
want to control.
• Reenter the code for your A/V product from the code
listings on the separate sheet included.
•Try searching for codes as described on page 10.
• Replace the Remote’s batteries.
15
DI-000-HCCUR-00A 7/5/02, 2:19 PM15