Transport Control “Punch Through”
You can set-up your remote control so that VCR or CD
Transport Controls (PLAY, STOP, FAST FORWARD,
REWIND, PAUSE, and RECORD) will also operate in other
modes on the remote control.
Note: When this feature is active, the VCR or CD functions
(PLAY, STOP, FAST FORWARD, REWIND, PAUSE, and
RECORD) will override any existing functions pre-assigned to
these buttons in that mode.
To Set-Up:
1
Select the mode into which you want to program
Transport Control “Punch Through.”
2 Press the corresponding Device Button and the MUTE
button simultaneously. SET will appear in the LCD.
3 Press the SELECT/PLAY button. PUNCH will appear in
the LCD.
4 Press either the VCR Device Button to set-up for VCR
Transport Control or the CD Device Button to set-up for
CD Transport Control. VCR or CD will flash in the LCD,
depending on the Device Button selected.
26
26
.
PRE.
