Filter
Top Products
20
The Unifier
Erasing All Learned Commands in One Device
Press and hold both the Device button where the
command is stored and the SELECT button for three
seconds.
Note: You have 30 seconds for each step, otherwise the
Unifier will time out automatically.
The Unifier display changes to:
Press and hold both the DEVICE button you’d like to
erase and the PAUSE button until the display flashes
ERASE nine times, followed by CLEAR, then release
the buttons and the Unifier returns to normal
operating mode.
PAUSE
Button
DEVICE
Buttons
LEARN
1
2
SELECT
Button
Device
Buttons