Filter
Top Products
24
The Unifier
The Expander converts radio signals to standard
infrared commands and sends them out via a
built-in front blaster to components in the same
cabinet space.
The Unifier sends
radio signal to the
Expander, which is a
radio receiver.
Self-adhesive “flashers” (included in the
Expander kit) affix to the front panels of
your components. The flashers relay
infrared commands to components out-
of-sight of the MRF-100 front blaster.
The flashers plug into the MRF-100 rear
flasher line output jacks. Each flasher
has a 10’ cable to easily reach compo-
nents on nearby shelves.