Filter
Top Products
21
URC-100
Erasing All Learned Commands in ALL Devices
Press and hold both the POWER ON and the STOP
button for ten seconds.
After the display flashes ERASE ten times you can release
the buttons. The display will flash CLEAR and the Unifier
will return to normal operating mode.
Erasing a Macro
Press and hold both the DEVICE button and the
MUTE button (to erase Device buttons, use AUDIO
and MUTE). Release after SET appears on the display.
Note: You have 30 seconds for each step, otherwise the
Unifier will time out automatically.
Press the macro button you want to erase. The
display will flash “CLEAR” then “M ###”.
Press the LIGHT button to save.
STOP
Button
POWER
ON
Button
Mute
Button
DEVICE
Buttons
1
2
3