Univex 20LS1RA Flat Panel Television User Manual


 
EXTERNAL EQUIPMENT SETUP
22
EXTERNAL EQUIPMENT SETUP
Manual Configure
If the picture isn’t clear after auto adjustment and especially
if characters are still trembling, adjust the picture phase
manually.
This function works in the following mode: RGB-PC mode.
Press the
MMEENNUU
button and then use
DD
or
EE
button
to select the
SSccrreeeenn
menu.
Press the
GG
button and then use
DD
or
EE
button to
select
MMaannuuaall ccoonnffiigg..
.
Press the
GG
button and then use
DD
or
EE
button to
select
HH--ppoossiittiioonn
,
VV--ppoossiittiioonn
,
PPhhaassee
, or
CClloocckk
.
PPhhaassee
This function allows you to remove any horizontal
noise and clear or sharpen the image of characters.
CClloocckk
This function is to minimize any vertical bars or
stripes visible on the screen background. And the
horizontal screen size will also change.
HH--ppoossiittiioonn
/
VV--ppoossiittiioonn
This function is to adjust picture to left/right and
up/down as you prefer.
Press the
FF
or
GG
button to make appropriate adjust-
ments.
Press the
EENNTTEERR
button to save.
1
2
3
4
5
Screen
Auto config.
Manual config.
Reset
Screen
Auto config.
Manual config.
G
Reset
H-Position 50
V-Position 50
Phase 30
Clock 50
1
3 42
DE FG
MENU
DE FG
MENU