Filter
Top Products
Safety Guidelines
Warning: This device must be operated with the original power supply, part number: 12VDC
LSE9901B1250, 12VDC UP06031120.
CAUTION: The socket-outlet should be installed near the equipment and should be accessible.
CAUTION: Use a power cable that is properly grounded. Always use the appropriate AC cord that
is certified for the individual country. Some examples are listed below:
IMPORTANT NOTICE CONCERNING POWER CORD SELECTION
The power cord set for this unit is enclosed and has been selected according to the country of
destination and must be used to prevent electric shock. Use the following guidelines if it is
necessary to replace the original cord set or if the cord set is not enclosed.
The female receptacle of the cord set must meed IEC-60320 requirements and may look like
figure A1 below:
FCC Warning
To assure continued FCC compliance, the user must use a grounded power supply cord and the
provided shielded video interface cable with bonded ferrite cores. If a BNC cable is going to be
used, use only a shielded BNC(5) cable. Also, any unauthorized changes or modifications not
expressly approved by the party responsible for compliance could void the user’s authority to
operate this device.
CE Conformity for Europe – The device complies with the requirements of the EEC directive
89/336/EEC as amended by 92/31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic
compatibility”, and 73/23/EEC as amended by 93/68/EEC Art.13 with regard to “Safety”.
ViewSonic N3200w 29
Switzerland .…SEV
Britain..............BASE/BS
Japan...........…Electric Appliance Control Act
USA................UL
Canada ..........CSA
German
y
........VDE