ViewSonic 3 VT2645 / VT3245 / VT3745
English
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
Important Safety
Instructions
1. Read these instructions completely before
using the equipment.
2. Keep these instructions in a safe place.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean with a soft, dry cloth.
7. Do not block any ventilation openings. Install
the equipment in accordance with the manu-
facturer’s instructions.
8. Do not install near any heat
sources such as radiators, heat
registers, stoves, or other devices
(including amplifiers) that pro-
duce heat.
9. Do not attempt to circumvent the safety pro-
visions of the polarized or grounding-type
plug. A polarized plug has two blades with
one wider than the other. A grounding type
plug has two blades and a third grounding
prong. The wide blade and the third prong are
provided for your safety. If the provided plug
does not fit into your outlet, consult an elec-
trician for replacement of the outlet.
10. Prevent the power cord from being tread upon
or pinched, particularly at the plug, conve-
nience receptacles, and the point where they
exit from the device. Be sure that the power
outlet is located near the equipment so that it
is easily accessible.
11. Only use attachments/ accessories specified
by the manufacturer.
12. Use only with the cart, stand, tri-
pod, bracket, or table specified by
the manufacturer, or sold with the
apparatus. When a cart is used,
use caution when moving the cart/
apparatus combination to avoid injury from
tip-over.
13. Unplug this apparatus when it will be unused
for a long period of time.
14. Refer all servicing to qualified service per-
sonnel. Servicing is required when the appa-
ratus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, or the unit does not operate
normally, or has been dropped.
USE
AC power Cord
Keep the following guidelines to protect the AC
power cord from being damaged. If the AV power
cord is damaged, it may result in a fire or an elec-
tric shock. Stop using it and ask your dealer or
ViewSonic service center to exchange it.
• Do not place the TV where the power cord is
subject to wear or abuse.
• Do not pinch, bend, or twist the cord exces-
sively.
• The core lines may be bared and cut, causing a
short-circuit, and resulting in a fire or an electric
shock.
• Do not convert or damage the
power cord.
• Avoid power cord being rolled
over or rested upon.
• When the power cord is plugged in, do not
move the TV.
• Keep the power cord away from heat sources.
• When you disconnect the AC power cord, dis-
connect it from the wall outlet first.
• When disconnecting the power cord, grasp the
plug instead of pulling the power cord.
• Use only an original ViewSonic AC power
cord, not other brands.
• Do not use the supplied AC power cord on any
other equipment.
Wall outlet
The TV set with a three-wire ground-
ing type AC power cord plug must be
connected to an AC power socket
outlet with a protective grounding
connection.
Do not use an unfitting outlet. Insert
the plug fully into the outlet. If it is
loose, do not use it. Doing so may cause arcing
and result in a fire. Contact your electrician to
change the outlet.
Wiring
For your safety, be sure to unplug the AC power
cord when connecting cables.
Take care not to trip on the cables. It may cause
damage to the TV set.
Electric shock
Do not touch the AC power cord or
the TV with a wet hand. If you plug/
unplug the AC power cord from the
TV with a wet hand, it may cause
electric shock.