Filter
Top Products
ViewSonic WPG-150 36
E
N
G
L
I
S
H
Declaration of RoHS Compliance
This product has been designed and manufactured in compliance with
Directive 2002/95/EC of the European Parliament and the Council on
restriction of the use of certain hazardous substances in electrical and
electronic equipment (RoHS Directive) and is deemed to comply with the
maximum concentration values issued by the European Technical
Adaptation Committee (TAC) as shown below:
Certain components of products as stated above are exempted under the Annex of the RoHS
Directives as noted below. Examples of exempted components are:
1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not
specifically mentioned in the Annex of RoHS Directive
2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic
ceramic parts (e.g. piezoelectronic devices)
3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or
more lead)
4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium
containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by
weight.
For EU-member states only as follows
The mark shown to the right is in compliance with the Waste Electrical and
Electronic Equipment Directive 2002/96/EC (WEEE). The mark indicates the
requirement NOT to dispose the equipment as unsorted municipal waste, but
use the return and collection systems according to local law.
Substance
Proposed Maximum
Concentration
Actual
Concentration
Lead (Pb 0.1% <0.1%
Mercury (Hg) 0.1% <0.1%
Cadmium (Cd) 0.01% <0.01%
Hexavalent Chromium (Cr
6+
)
0.1% <0.1%
Polybrominated biphenyls (PBB) 0.1% <0.1%
Polybrominated diphenyl ethers (PBDE) 0.1% <0.1%