Viper G5102V Universal Remote User Manual


 
11
© 2008 Directed Electronics. All rights reserved.
Replacement remotes
Your system comes with two Responder remote controls (P/N 7153V).
If additional remotes are desired, please see your authorized dealer or
visit
www.directedstore.com
to order.
System maintenance
The system requires no specific maintenance. Your One way remote
is powered by small coin cell lightweight 3-volt lithium battery that will
last approximately one year under normal use. The remote uses one
CR2032 cell battery. When the battery begins to weaken, the operat-
ing range will be reduced.
Low battery indicator
When the batteries are low the alarm then emits an additional chirp
upon disarming of the alarm to let you know its time to change the
remote battery.
Note:
The Arm/Disarm chirps should be programmed ON for the
alarm to emit any additional chirps during disarm. Ask your authorized
dealer if you have any questions.
Battery Replacement
Slide the door up to expose the battery beneath the holder. Remove the
expired battery. Place the new battery into the remote control. When
power is returned the remote control is ready for use.
Two Car Operation
You can use the remote control system for two cars with full command
capability for both vehicles.