Vivitek du6871 Projection Television User Manual


  Open as PDF
of 54
 
12
DU6871/DW6851/DX6831 DLP Projector - User's Manual
BLANK
3D MODE
• ON
Use the button to turn on the projector�
• OFF
Use the button to turn off the projector�
• FOCUS
Adjust the focus of the projected image�
• ZOOM
Zoom in/out the projected image�
• TESTPATTERN
Use the button to display the test image� Push to switch to
the next test image and push the EXIT button to return to the
projected image�
• LENSSHIFT
Use the button to move the lens to the right or left�
• ENTER
Use the button to select settings or conrm the changed settings.
• MENU
Push the button to display or hide the OSD menu�
• EXIT
Push the button to return to the menu on the previous level or exit
the OSD menu�
• INPUT
Push the button to select the input source�
• PICTURE
Start to adjust the image�
• NETWORK
Push the button to enter the LAN menu�
• AUTOSYNC
Push the button to carry out automatic signal synchronization�
• ASPECT
Repeatedly push the button to select the proportion for the next
screen�
• BLANK
Push the button to temporarily interrupt the projection�
• OVERSCAN
Push the button to select the overscan mode�
• FREEZE
Freeze/cancel the freeze of the projected image�
• LAMPMODE
Push the button to select dual lamp, Lamp 1 Lamp 2, Single�
• 3DMODE
Display the 3D settings menu�
• INFO.
Display the service menu�
• LIGHT
Push the button to turn on the backlight of the remote control�
• CLEAR:Nofunction
• SHUTTER
Use the button to open/close the shutter�
• IDSET:Nofunction
Remote Control
RemoteControlInstructions
• Reectionmaybeaffectedbytheenvironmentundersomecircumstances.Aimtheremotecontrolattheprojecttotryagainif
ithappens.
* Changethebatteryiftheeffectivedistanceoftheremotecontrolisreducedortheremotecontroldoesnotwork.
• Whentheterminaloftheremotecontrolcableisinsertedtothewiredcontrolterminaloftheprojector,theprojectorwill
automaticallyswitchtothewiredcontrolmodeandcannotbecontrolledthroughtheIRsignaloftheremotecontrol.Disconnect
thewiredcontrolterminalontheprojectorifyouwanttocontrolthroughtheIRsignaloftheremotecontrol.
• PayattentiontotheinstallationenvironmentbecausethesignalmaynotworkduetointerferenceiftheIRremotesensoris
exposedtothebrightsunlightoruorescence.
 previous next