Vizio E220VA Flat Panel Television User Manual


  Open as PDF
of 48
 
3
6
Completing the First-Time Setup
The rst time you turn on the TV, the Setup App will guide you through each of the
steps necessary to get your TV ready for use.
Before you begin the rst-time setup:
• YourTVshouldbeinstalledandthepowercordshouldbeconnected
toanelectricaloutlet.
• Haveyourremoteready.Ensurethebatteriesareinserted.
• Yourdevicesshouldbeconnected.
To complete the rst-time setup:
1. Turn the TV on by pressing the Power/
Standby button on the remote.
The Setup App is displayed.
Press the Right Arrow button on the
remote to go to the next screen.
2. Use the Up/Down Arrow buttons on
the remote to highlight your preferred
language, then press Right Arrow.
3. Use the Up/Down Arrow buttons on
the remote to highlight Home and
press Right Arrow.
Initial Setup
Allow the VIZIO setup Wizard to
help you tune your channels.
Welcome
Next Exit
EXIT
Initial Setup
Please select your language: English
Français
Español
Language
NextBack Select Exit
EXIT
Initial Setup
Please select your input location:
NextBack Select
Home
Retail
Mode Setting
Exit
EXIT
4. If the TV is connected to an external
antenna, select Antenna, then press
Right Arrow and go to step 5.
If the TV is connected to a cable
service without a set-top box (cable is
connected directly from the wall outlet)
select Cable, then press Right Arrow
and go to step 5.
If the TV is connected to a cable or
satellite set-top box, press the EXIT
button on the remote, then select the
input to which your set-top box is
connected (HDMI, COMP, or AV).
5. Use the Up/Down Arrow buttons on
the remote to highlight Scan, then
press Right Arrow.
The TV begins a channel scan.
6. Wait for the channel scan to nish.
7. When the channel scan is complete,
the Congratulations screen is
displayed.
The rst-time setup is complete.
Initial Setup
Please select your input source:
NextBack Select
Antenna
Cable
Tuner
Exit
EXIT
Initial Setup
Please connect your cable or
antenna to the DTV/TV input
Scan
Skip Scan
Channel Scan
Next Exit
EXIT
Back Select
Initial Setup
Channel Scan will take a few
minutes to complete.
Status: Scanning..
Analog Channels: 0
Digital Channels: 4
Channel Scan
Exit
EXIT
Initial Setup
Congratulations !!
Initial Setup completed
Complete
Back Next
 previous next