Filter
Top Products
5
30
• TV Speakers - Turns the built-in speakers on or off.
• SRS StudioSound HD - StudioSound HD
™
is a
feature-rich surround sound solution which delivers
an immersive surround sound experience from the
TV’s internal speakers. Additionally, StudioSound
HD completes the entertainment experience by
maintaining a steady volume while watching
programming and movies, providing deep, rich bass,
and delivering crisp details and clear, intelligible
dialog. Select Surround or Standard.
• SRS TruVolume - TruVolume
®
intelligently normalizes
volume fluctuations due to television commercials or
channel changes. Select On or Off.
• Advanced Audio - See
Adjusting the Advanced Audio
Settings
on page 30.
• Equalizer Settings - Adjust the boost or attenuation of
different frequencies. Change the equalizer presets
by selecting Flat, Rock, Pop, Classical, or Jazz. To
customize the equalizer settings yourself, set EQ Mode
to Advanced, then adjust each frequency or set EQ
Mode to Basic, then adjust Bass and Treble settings.
(This setting is only available when SRS StudioSound
HD is set to Standard)
• Reset Audio Mode - Restores the audio settings to the
factory defaults. See
Resetting the Audio Settings on
page 31
.
4. When you have finished adjusting the audio settings,
press the EXIT button on the remote.
Adjusting the Advanced Audio Settings
To adjust the advanced audio settings:
1. From the Audio Settings Menu,
use the Arrow buttons to
highlight Advanced Audio,
then press OK. The Advanced
Audio menu is displayed.
2. Use the Arrow buttons to
highlight the setting you
wish to adjust, then press
Left/Right Arrow buttons to
change the setting:
• Digital Audio Out -
Changes the type of
processing for the Optical
output when connected
to a home theater audio
system. Select Off, Dolby
Digital, or PCM.
• Analog Audio Out -
Sets the volume control
properties for the analog
3.5mm connector when
connected to a home
theater audio system.
Select Variable to control
the external speakers’
volume from the TV’s
volume controls, or select
Fixed to control the
external speakers’ volume
from your home theater
system controls.