Filter
Top Products
VIZIO E322VL User Manual
34
www.VIZIO.com
Equalizer Settings
To select the options in the
Equalizer Settings sub-menu, press
OK. A new menu will be displayed
showing the available equalizer
functions. Press ◄ or ► to select
Basic or Advanced.
EQ Mode (Basic)
Adjust Bass and Treble.
EQ Mode (Advanced)
Adjust boost or attenuation of
different frequencies.
Starting from lowest to the highest,
they are 100 Hz, 300Hz, 1 kHz, 3
kHz and 10 kHz. Press ▼ then◄ or
► to select the frequency to be
adjusted. Press OK.
Press ▲ or ▼ to adjust the selected
frequency to your preference. Values above 0 will boost the frequency and values below 0 will
attenuate the frequency.
Note: The Equalizer adjustment will only be available when SRS TSHD is set to Off.
Reset Audio Mode
Return all Audio settings to factory default. A screen will come up to confirm your selection or to
cancel it. Press ◄ or ► to make the selection, and then press OK to accept it.
Note: Only settings under the Audio menu will be reset.
Network Menu
When you first turned on your HDTV you set up your network connection using the Setup App. If you did
not do this or if your setup has changed, you can do this from the Network
menu.
The Ethernet function on your HDTV is used to access the Internet. Your HDTV also has 802.11n
wireless, so you can connect your TV to the Internet through your wireless home network. A wired
connection may deliver a more consistent connection depending on the
conditions in your home environment. When you enter the Network Menu
you will see your current connection method.
Wired Connection
View that your wired connection is set to Connected. This is not an option
that you can adjust. It is for information only.
Manual Setup
Select to view and/or manually change your network settings.
Change Settings
Select to manually change your network settings such as the IP
Address, the Subnet Mask, the Default Gateway, the Preferred
DNS Server, and the Alternate DNS Server.
Warning: unless you are an advanced user and are comfortable with
wired and wireless networks, do not adjust these settings.