Filter
Top Products
6
21
E321ME / E420ME / E460ME
Adjusting the Picture Settings
Using the Picture menu, you can adjust the
following settings:
• Enable or disable the ambient light
sensor
• Change the picture mode
• Adjust noise reduction
• Adjust color temperature
• Enable or disable color enhancement
• Enable or disable adaptive luma
• Enable or disable DCR
(Dynamic Contrast Ratio)
• Reset the picture mode settings
Enabling or Disabling the Ambient Light Sensor
When enabled, the ambient light sensor detects the light levels in the room to
optimize the brightness of the TV’s backlight.
When the ambient light sensor is enabled, you will be unable to
manually change the TV’s backlight settings.
To enable or disable the ambient light sensor:
1. Press the OK button on the remote. The on-screen menu is displayed.
2. Use the Arrow buttons to highlight Picture and press OK.
3. Use the Arrow buttons to highlight Ambient Light Sensor.
4. Use the Left/Right Arrow buttons to change the setting to Off or On.
5. Press EXIT.
Changing the Picture Mode
Your TV display can be adjusted to suit your preferences and viewing conditions.
To change the picture mode:
1. Press the OK button on the remote. The on-screen menu is displayed.
2. Use the Arrow buttons to highlight Picture and press OK.
3. Use the Arrow buttons to highlight Picture Mode and press
OK.
4. Use the Arrow buttons to highlight one of the following options, then press
OK:
• Standard - Sets the various picture settings to values that will produce
the best picture in the most cases. This is the recommended setting.
• Movie - Sets the picture settings to values perfect for watching a movie
in a dark room.
• Game - Optimizes the picture settings for displaying game console
output.
• Vivid - Sets the picture settings to values that produce a brighter, more
vivid picture.
• Custom - Allows you to manually change each of the picture settings:
Backlight - Adjusts the LED brightness to affect the overall
brilliance of the picture. This option is not available unless Ambient
Light Sensor is set to Off.
Brightness - Adjusts the black level of the picture. When this
setting is too low, the picture may be too dark to distinguish details.
When this setting is too high, the picture may appear faded or
washed out.
Contrast - Adjusts the white level of the picture. When this setting
is too high, the picture may appear dark. When this setting is too
low, the picture may appear faded or washed out. If the setting is
too high or too low, detail may be difcult to distinguish in dark or
bright areas of the picture.
Color - Adjusts the intensity of the picture colors.
Tint - Adjusts the hue of the picture. This setting is useful in
adjusting the esh tones in the picture. If esh appears too orange,
reduce the level of color before adjusting tint.
Sharpness - Adjusts the edge sharpness of picture elements. It can
be used to sharpen non-HD (high denition) content; however, it will
not produce detail that does not otherwise exist.